St Linus

This roof had insulation.

After replacing a few damaged insulation pieces the roof was covered with a base sheet.

Polyester being applied with emulsion. This process has no odor.

After the polyester was installed, we used a special high-pressure gun to apply 9 gallons of emulsion per 100 sq. feet while at the same time chopping up and shooting fiberglass into the mix. This provides one of the toughest waterproofing barriers available.

After the polyester was installed, we used a special high-pressure gun to apply 9 gallons of emulsion per 100 sq. feet while at the same time chopping up and shooting fiberglass into the mix. This provides one of the toughest waterproofing barriers available.

After the polyester was installed, we used a special high-pressure gun to apply 9 gallons of emulsion per 100 sq. feet while at the same time chopping up and shooting fiberglass into the mix. This provides one of the toughest waterproofing barriers available.

The finished roof. The upper roof was coated with a white elastomeric coating; the center section was coated with aluminum.

The finished roof. The upper roof was coated with a white elastomeric coating; the center section was coated with aluminum.

The finished roof. The upper roof was coated with a white elastomeric coating; the center section was coated with aluminum.

Before.

After.